Extra rods for blocking board, 10pcs

Need extra rods for blocking board? 10 pcs stainless steel rods, each 12 cm(4,72 inch) long. The rods are inserted from the top into the blocking board. Before first use, it’s recommended to wash the rods gently with water and a mild detergent to remove any residue from the manufacturing process.

Tips for using the Blocking board:

Push the rods into the Board from the top, so that it is easy to add patches to the Board. You can block several patches at once. Wash or dampen the patches, straighten and shape. Pin the patches to the Board with rods. Let the patches dry stretched out to the Board.

Note! The holes in the Blocking Board are purposely made tight so that they don't loosen during use. Especially the first time, installing the rod in place can feel tight. As a tip, the first time you apply the rod, you should place the rod in the hole and press the Board against a hard surface. In the future, the rod goes to the same hole easily and stays firmly in place.

10 pcs stainless steel rods